Gas fireplace inserts

Heat accumulation

Our gas fireplace inserts are robustly constructed with materials suitable into the radiant enclosure to increase heat and useful comfort of the whole appliance.

• Number of blocks in accumulation mass set is dependent on the size of model

• Each accumulation block with the volumetric weight of 3 250 kg/m³ weights 20 kg

The sound of a burning fire

Flawless flames are completed by the sound of burning wood from integrated speakers in the lower part of the combustion chamber. The whole solution is designed to withstand thermal load and sound spreads from the area of the front glass.

Remote control

We place great importance on intuitive controls concerning modern trends in mobile electronics. We developed remote control with energy saving OLED display covered by glass and uses Bluetooth technology to communicate. Signal reach in living rooms is according to local conditions up to 25 m and the signal penetrates through obstacles corresponding to a concrete slab of 30 cm thickness.

Control functions:

• Flame intensity low / medium / high / random
• Thermostat
• Embers glow intensity
• Sound volume (only Wi-Fi or Audio Unit)
• Timer

Customization of the lining

We tailored our products bearing in mind that customization of gas fireplace inserts to individual requirements is particularly important. Almost all visible surfaces can be exchanged with individual materials with adequate temperature resistance (natural stone, ceramic, etc.).

Individual material as part of the combustion chamber
The bottom build-on frame and outer combustion chamber frame can be lowered up to 30 mm and create a supporting element for individual material, which visually eliminates the presence of glass. Side build-on frames can be moved up to 30 mm as well which connects to the replaceable back wall in the combustion chamber.

Realistic fire

The key part of a perfect fireplace atmosphere is the appearance of the combustion chamber. Our gas fireplace inserts have a combustion chamber furnished with shaped 3D bottom and two separately controlled types of burners.

Eko mode
It is possible to run our products in low intensity - Eko mode, where only primary burners are active and power output is low round 2 kW.

Random mode
When set to random mode the intensity of all burners is continuously changing in the range from 30 to 100 %. This function completes the feel of natural flames and lowers gas consumption.

Dynamic glow

All our gas fireplace inserts include an LED dynamic backlight. The combustion chamber backlight is provided by PCB with three LED spots and a microprocessor controlling the variable lighting of each LED spot. PCB is equipped with a cooler to ensure thermal protection and with milk glass to optimize light propagation in the combustion chamber. All results in dynamic ember glow.